
Custom Ceramic Glaze Matching
Standard white stock finish, with custom colors available on requestWall-Hung Rimless Soft-Square Toilet Manufacturer | cUPC CE UKCA WaterMark WC TAITAO-CH10603
The CH10603 floats the bowl off the floor to open up the bathroom: no pedestal base, no floor joint, just clean space beneath that mops in seconds. The wall-hung carrier hides the cistern inside the wall, leaving a slim soft-square rimless pan as the only visible element. Its 4/6L dual flush and 55mm wall outlet suit framed and compact installs. Finished with a UF/PP soft-close seat and cUPC, CE, UKCA and WaterMark available on request for wholesale and OEM.
Ready Mold Product Specs & Supply Terms
Mass Production Model • Active Mold #TAITAO-CH10603
- Product Name
- TAITAO CH10603 Wall-Hung Rimless Soft-Square Toilet (P-Trap 55mm)
- Type
- Wall-Hung Rimless Soft-Square Toilet
- Material
- Premium Vitreous China (Ceramic)
- Ceramic Firing Temp
- 1280 °C
- Water Absorption Rate
- < 0.2%
- Glaze Options
- Standard / Nano Optional
- Trapway & Structure
- Rimless · Fully Glazed Trapway
10-Year ceramic body warranty · 1-Year flushing mechanisms & accessories
Coverage applies to verified manufacturing defects — assessed from photos or videos before any remedy is issued. Remedy is 1:1 replacement or order credit.
6 Technical Core Highlights of Model TAITAO-CH10603
Every detail engineered to satisfy rigid Western plumbing codes, zero-defect quality control, and effortless sanitation maintenance.
1280°C Tunnel Kiln Vitrification
Cast from premium vitreous china ceramic formulations and vitrified at 1280°C in tunnel kilns. Results in an ultra-dense porcelain core with low moisture absorption (<0.2%), preventing odour penetration and glaze micro-cracking over decades.
Rimless Open-Rim Hygiene
The open-rim (rimless) bowl removes the concealed ledge where grime and bacteria collect. Water is delivered straight into the bowl through a fully glazed rim channel for even, efficient coverage, so a single flush clears it cleanly.
High-Efficiency Washdown Flush
High-efficiency washdown flushing paired with a 4 L / 6 L dual flush clears the bowl with less water and less noise. The open rim directs the full flush volume around the bowl for a thorough rinse on every use.
Wall-Hung Concealed Frame
Mounted on a concealed in-wall carrier frame (sold separately), the pan floats above the floor — freeing floor space and making daily cleaning underneath effortless. Ideal for compact European/UK en-suites and contemporary minimalist layouts.
Lightweight 24.9 KG Pan
At just 24.9 KG the vitrified pan is easy to handle, lift and set onto the frame — simplifying transport, on-site installation and stock handling versus heavier floor-standing or close-coupled units.
Fully Glazed 102mm Trapway
A 102 mm fully glazed internal passage supports the washdown action and reduces blockages and repeat flushes, so a single flush is usually enough — keeping maintenance low for contractors and end users.
Where CH10603 Works Best
From compact city apartments and rental properties to food-service venues and showroom specification, the wall-hung rimless CH10603 suits global projects — and is the mainstream choice across European and UK bathrooms, where same-floor wall drainage and modular in-wall frame systems make wall-hung the default. Concealed in-wall frame, open-rim bowl, 55 mm P-trap wall outlet, 4/6 LPF dual flush, and three finish options.
Residential Apartments & Homes
The wall-hung pan frees floor space and makes the bathroom feel larger — ideal for compact European/UK en-suites. The rimless open-rim bowl and 4/6 LPF dual flush reduce daily water use and keep the bowl easy to clean, while the floating form simplifies mopping underneath.
Airbnb & Short-Term Rentals
Hosts benefit from a contemporary wall-hung look guests notice, plus a rimless bowl with no hidden rim cavity that is straightforward to clean between check-ins. The soft-close seat and dual-flush cistern also cut noise complaints and utility costs.
Restaurants & Food Premises
Cafés, restaurants and commercial washrooms where hygiene audits matter. The rimless open-rim bowl removes the concealed ledge where grime collects, and the fully glazed trapway with high-efficiency washdown flushing supports efficient daily sanitisation — with no floor pedestal to trap dirt.
Showrooms & Specification Projects
Architects and wholesalers specifying for modern residential and hospitality developments. The wall-hung rimless form, three finish options and global certifications (CE / UKCA / cUPC / WaterMark) provide a standards-compliant, design-led choice.
TAITAO-CH10603 Wall-Hung Rimless Soft-Square Toilet Blueprint & Technical Dossier
Architectural-grade CAD drawings and factory-traced dimension matrix for architects, OEM/ODM sanitaryware importers, and wholesale distribution.

Technical Dimension Matrix & Capacity
Official factory parameters for architects, building contractors, and sanitaryware importers.
- Model ID & Type
- TAITAO-CH10603 (European Back-to-Wall WC)
- Overall Dimensions (L x W x H)
- 520 x 360 x 365 mm
- Bowl / Seat Width
- 360 mm
- Installation
- Wall-Hung — pan clips onto a concealed in-wall frame; the cistern is integrated in the frame (sold separately)
- Rough-In
- 55 mm P-trap wall outlet (waste centre 55 mm from finished wall)
- Drainage Type
- P-trap (Wall Outlet)
- Waste Outlet Diameter (OD)
- 102 mm
- Flushing System
- High-Efficiency Washdown (Rimless)
- Water Consumption
- Dual Flush 4/6L
- Net Weight
- 24.9 KG
Low-Maintenance Hygiene by Design
TAITAO-CH10603 is engineered for low-maintenance hygiene. The rimless open-rim bowl, fully glazed trapway and optional nano self-cleaning glaze reduce the surfaces where dirt and limescale can accumulate — and because the pan is wall-hung, there is no floor junction to trap grime. Routine care stays quick and chemical-light.
Rimless open-rim bowl
The open rim guides water evenly around the bowl on each flush with no concealed cavity to harbour bacteria. A quick wipe of the rim and bowl interior after use is enough for daily hygiene.
Optional nano glaze
Available with an optional nano self-cleaning antibacterial glaze. Its smooth, low-porosity surface helps resist stain and limescale adhesion, cutting down on scrubbing.
Gentle daily cleaning
Use a mild, non-abrasive liquid cleaner with a soft sponge or cloth. Avoid steel wool, scouring powders and prolonged contact with bleach or strong acids that can dull the glaze.
Wall-hung floor-free care
Because the pan floats on a concealed frame, the floor beneath stays clear — wipe or mop straight underneath with no pedestal or base to work around, ideal for high-traffic washrooms.
CH10603 Matching Components
Model CH10603 is the rimless wall-hung pan only — it mounts on a concealed in-wall carrier frame (sold separately as a frame + flush plate kit). Below are the standard accessories quoted and supplied with the pan or specified per project.
Concealed Frame & Flush Plate
The wall-hung pan mounts on a concealed in-wall carrier frame with an integrated cistern and an actuator flush plate (sold separately). The steel frame — not the wall or tiles — carries the full load, so it is fixed to the floor and rear structure, or embedded in a stud wall, before a tiled false wall is built over it. Choose a dual-flush plate to match the 4 L / 6 L system; future valve or seal servicing is reached through the flush-plate service window without breaking the wall.
UF or PP Soft-Close Seat
Supplied with a urea-formaldehyde (UF) or PP soft-close, quick-release seat — durable, hygienic and silent. The quick-release hinge lifts off in seconds for thorough cleaning.
Fill & Flush Valves
Fill valve and flush mechanism are specified for the concealed cistern inside the in-wall frame, compatible with common 1/2" supply lines and local plumbing standards.
Fixings & Wall Brackets
Mounting bolts, brackets and a pan-to-frame fixing kit secure the 24.9 KG pan to the concealed carrier. Confirm the 55 mm P-trap wall-outlet position matches your rough-in before install.
Dual Flush 4/6L — Less Water, Same Clean
Model CH10603 uses a 4 L / 6 L dual-flush system paired with a rimless washdown bowl and a fully glazed 102 mm trapway. Less water is needed for a complete rinse, lowering operating cost and environmental load without compromising hygiene. The model supports EU Water Label, UK Water Label and WELS (Australia/NZ) efficiency labelling where required.
Dual Flush 4 / 6 L
A 4 L partial flush for liquid waste and a 6 L full flush for solids. Average daily consumption stays well below older 9-13 L single-flush toilets.
Rimless Washdown
The open-rim bowl directs the flush volume evenly around the pan for a thorough clear with less water than a boxed-rim siphonic design.
Fully Glazed Trapway
A 102 mm fully glazed internal passage reduces blockages and repeat flushes, so a single flush is usually enough.
Market Water Labels
Supports EU Water Label, UK Water Label and WELS (Australia/NZ) efficiency labelling on request — certificate numbers available on request.
Compliance for North American & European Markets
Supporting North American and European market access; certificate numbers on request.
cUPC
IAPMO-listed for the United States and Canada. Certificate file number available on request.
European Comfort Height
European comfort rim height eases sitting and standing for residential, senior living, and hospitality installations.
CE
European standard compliance. 400 kg (880 lbs) static load test passed with zero structural deflection.
CH10603 ISTA-3A Drop-Tested Packaging System
Engineered for ocean freight, drop-shipping, and FCL container loading — every carton passes 10-point rotational drop testing before mass production release.

5-Layer Honeycomb Carton + EPS Molded Enclosure
Ceramic sanitaryware demands rigorous packaging engineered to withstand rough ocean freight handling and drop-shipping logistics. Every TAITAO-CH10603 toilet set can be outfitted with custom-molded Expanded Polystyrene (EPS) foam cushioning, providing complete shock-absorbing isolation for the ceramic bowl, water tank, and seat cover.
10-point rotational drop test passed with 0% ceramic fractures.
Wooden corner guards & plastic stretch wrapping for ocean freight.
Full-color artwork, UPC barcodes, and installation instructions.
Passes e-commerce parcel handling specs without secondary boxing.
Custom OEM/ODM Toilet Manufacturing Process
Custom toilet manufacturing is a specialized industrial engineering process. From initial concept and hydraulic 3D modeling to CNC steel molds, kiln sample firing, and global certifications, our factory guides every phase to turn your exclusive sanitaryware design into mass-produced reality.
Custom Toilet Mold Development & Precision CNC Tooling Engineering
Why Top Brands Choose Our Kiln Line
Automated precision control from mud preparation to computerized packaging.
Continuous 18-hour tunnel kiln firing cycle ensures full porcelain vitrification with <0.2% water absorption rate.
High-precision steel mold CNC fabrication maintains accurate shrinkage tolerances across 100,000+ unit runs.
Every ceramic bowl undergoes automated air-vacuum leak inspection.
Rapid turnaround from hydraulic CAD simulation to first-article sample dispatch with guaranteed NDA exclusivity.
Requirements & Code Specs
Target-market plumbing standards (cUPC, CE, UKCA, WaterMark), rough-in dimensions, flushing mechanics, and aesthetic styling.
3D CAD & Mold Design
3D modeling of body geometry, glaze trajectory, and mold tooling design with DFM optimization and hydraulic simulation.
In-House Mold Fabrication
High-precision CNC steel master and plaster production molds machined 100% in-house for high-pressure slip casting lines.
1280°C Firing & Golden Sample
Slip casting, nano-glaze spray application, and sample firing in 1280°C computerized tunnel kilns to adjust for ceramic shrinkage.
Mass Production & Inline QC
High-pressure casting, 6-axis robotic electrostatic glaze, and automated kiln firing with in-line dimensional laser inspections.
Final QC & Export
100% leak and load testing, ISTA-3A drop-tested honeycomb cartons, container loading supervision, and export documentation.
Enterprise OEM / ODM Customization Capabilities
Flexible private labeling options for sanitaryware brands, developers, and regional distributors.
Laser Branding & Logo
Permanent high-precision laser logo etching on ceramic tank lids, flush button caps, and seat cover badges.
Custom Glaze Finishes
Pantone / RAL ceramic glaze color matching (Matte Black, Slate Gray, Cashmere, Pearl White, Dual-tone).
Hardware & Button Plating
Dual-flush button plating: Chrome, Matte Black, Brushed Gold, Gunmetal Gray, Rose Gold with Geberit / R&T valves.
Custom Packaging & Manuals
Full-color 5-layer export boxes with brand graphics, barcode labels, and custom language installation guides.
Custom Mold Lead Time: 60 Days • Initial Evaluation Samples Available • Confidential NDA Guaranteed
Toilet
Master Series
Complete Product Catalog
The TAITAO Complete Toilet Series Catalog
Our 2026 Master Product Catalog covers the complete TAITAO lineup of premium vitreous china toilets — one-piece, two-piece, back-to-wall, wall-hung and rimless washdown designs, high-efficiency dual-flush systems, fully glazed trapways, UF/PP soft-close quick-release seats, metric rough-in configurations and global OEM/ODM manufacturing capabilities. The full 26-page catalog and the complete 2D CAD packages are published in the TAITAO Download Center; per-model spec sheets are downloadable on each product page.
Complete Toilet Lineup
One-Piece, Two-Piece, Back-to-Wall, Wall-Hung & Rimless Toilets
Global B2B Certifications
cUPC (US/CA) · CE & UKCA (EU/UK) · WaterMark (AU/NZ)
The full 26-page catalog and the complete 2D CAD packages are listed in the Download Center.
Explore TAITAO's Complete Ceramic Sanitaryware Portfolios
Direct-factory OEM/ODM manufacturing across kitchen & bathroom ceramic fixtures. Sourced by global distributors, real-estate project developers, and private-label brand owners.
FFC Fine Fireclay Kitchen Sinks
Heavy-duty FFC (Fine Fireclay) workstation & apron-front farmhouse sinks engineered with cUPC-listed non-porous glazes, sliding accessory tracks, and 1280°C kiln vitrification.
Toilets & Water Closets
High-efficiency ceramic toilets with rimless washdown flushing technology, nano-antibacterial glazes, and international water-saving compliance.
Bathroom Wash Basins
Precision vitrified china vanity basins, countertop vessel sinks, and pedestal wash basins designed for commercial developments and luxury residential baths.
Related Wall-Hung Toilets
TAITAO-CH10603 Frequently Asked Questions
Questions most often asked by importers and specifiers about Model CH10603 — answered by our factory team based on the model's actual specifications.
Get in Touch with TAITAO
Send us your project requirements, RFQ, or product questions directly to our manufacturing headquarters in Tangshan, China.
Contact Details
Factory Location
North of Linxi Road, East of Madong Road,
Guye District, Tangshan City, Hebei, China
Call / WhatsApp
+86 139 1106 5773Direct responses within 12 business hours. Free CAD files & container load planning available.
